“What a great job from Tile Collective. They removed the old tiles and shower doors and made everything absolutely amazing! I couldn’t ask for more. Exceeded all expectations.”Armond C.Shower renovation
Tile isn’t waterproof. What’s behind it is.
Grout and tile let water through. Whether a shower lasts five years or thirty depends on the waterproofing hidden behind it. We build showers with modern bonded systems from Schluter® and LATICRETE® that keep water at the surface, instead of letting it soak into the walls and floor.

Why we don’t rely on cement board and mud beds alone.
Traditional showers were built as “water in, water out” systems: water passes through the tile, soaks into the backer board and the mortar bed, and is supposed to find its way to the drain. When everything is perfect it can work, but the materials can stay damp for a long time.
Cement board walls
✕Cement board
Cement board is water-resistant, not waterproof. Moisture moves through it toward the wall cavity unless a separate barrier stops it.
Mortar bed over a pan liner
✕Mud bed floors
The liner sits under the mortar bed, so the bed itself can stay wet — which raises the risk of mold, odor and efflorescence.
- Hot-mopped pans are older still. Layers of hot asphalt and felt under the mortar bed: messy to install, and the mortar above them still soaks up water.
Waterproofing right under the tile.
Bonded waterproofing puts a continuous membrane directly beneath the tile and connects it to a drain made for it. Water stays on the surface and goes down the drain — the substrate behind it stays dry.
Schluter® KERDI over the base
Schluter® system
- KERDI membrane bonded under the tile with thin-set.
- KERDI-DRAIN bonds directly to the membrane.
- KERDI-BOARD waterproof panels for walls, benches and niches.
- Prefabricated sloped trays for a consistent pitch.
LATICRETE® HYDRO BAN pre-sloped pan
LATICRETE® system
- HYDRO BAN pre-sloped pan replaces the mortar bed.
- HYDRO BAN liquid membrane or HYDRO BAN Board on the walls.
- Preformed curbs, seats and niches.
- Components rated for steam showers.

Sealed first. Then tiled.
- The right system for the project. We choose Schluter or LATICRETE based on your layout, drain and finish.
- Every detail covered. Seams, inside corners, niches, benches, valves and the drain are sealed before tile.
- One manufacturer per assembly. Components from the same system, installed the way the manufacturer specifies.
- Steam showers too. We use components rated for steam where the project calls for it.
Shower waterproofing FAQs
Isn’t grout sealer enough to waterproof a shower?
No. Sealer helps grout resist stains, but tile and grout still let water through. The waterproofing layer behind the tile is what protects your home.
Schluter or LATICRETE — which is better?
Both are proven bonded systems. We choose based on the shower’s shape, drain location and finish, and we’ll explain the choice for your project.
Can you waterproof a steam shower?
Yes. Both manufacturers offer components rated for steam showers, and we plan the assembly for that use.
Do you remove the old shower first?
Yes. Demolition and preparation are part of a shower remodel estimate.
What clients say.
“His strong work ethic and attention to detail really stood out from the start. The quality of his work exceeded our expectations. He was professional, efficient, and worked tirelessly to ensure everything was perfect.”Mike N.Bathroom renovation
“They did the tile floor and shiplap in my bathroom. It looks amazing. Vitalii was straightforward, communicated everything very well, had no hidden surprises or costs, and worked quickly and efficiently.”Amanda B.Bathroom tile
Excerpts from verified client reviews on Thumbtack · 100+ reviews and counting. Read more reviews
Planning a new shower?
Ask us which waterproofing system we’ll use. We’ll show you, layer by layer.